Look for someone who pays attention to detail when looking for your Sash Window Repairs specialist. This person should be equally good at painting and decorating as some older homes have a lot of beautiful detail in their windows to be restored. Look for references on people who specialize in this area and take a look at their work if you can.
Take a look at your windows to determine what kind of restoration they made need so that you understand the work that needs to be done. The mere fact of a house settling can make the window hard to operate and in this case will most likely require some carpentry to square it off. It may just be that the windows are painted with many coats over the years and it's causing them to stick. They may need stripping and if they are old lead paint could be involved causing special removal techniques.
Removing the sash will involve prying the front molding off to allow for it's removal. At this point the cords can be accessed and removed in order to measure them for cutting new ones. The molding strips on the upper sash can now be removed and it can be removed along with any hardware.
Cleaning the window is important, all the old putty will need to be scraped out with a wire brush and putty knife and the glazer's points removed. This allows for the glass to be removed, carefully. At this point the condition of the wood can be determined and all dry rot removed and filed with epoxy and allowed to dry for a day. It can then be sanded and primed.
Hand roll new glazing compound and lay into the exterior groove of the sash and press the glass into it, insert glazier's points evenly spaced to hold the glass in.
Use another hand rolled length of glazing compound on top of the glass and bevel it with the putty knife. After it has cured about a week, paint the putty with an oil-based primer and a coat of acrylic latex paint to the entire sash.
Replacing old molding and weatherstripping with new assures a more efficient window and less labor is involved in having to strip the old molding. The pulleys should be sprayed with silicone or Teflon and reattached to the upper and lower sashes along with the weigh being replaced.
Get more information on how sash window draught proofing can save you money and add to the value of your home quickly! You can get sash window renovation completed easy and begin enjoying the savings today!
|
|